Generac 7260 22 kW Home Standby Generator — Dual Fuel
22 kW on propane, 21 kW on natural gas. Air-cooled, auto-start. Ships free by freight.
Generac 7260: The 22kW Air-Cooled Workhorse
The Generac 7260 is an air-cooled home standby generator rated 22kW on liquid propane and 21kW on natural gas. It watches the utility feed, starts on its own when power drops, and carries the house until the grid comes back — no cords, no manual starting, nothing to remember during a storm.
Generac 7260 Key Highlights
- 22kW LP / 21kW NG — rated separately by fuel, so size on the figure you will actually run
- Transfer switch sold separately — so you can match the switch to your actual service
- Dual fuel — liquid propane or natural gas, selected at install
- Automatic operation — self-test, auto-start, auto-transfer
- Air-cooled — no radiator or coolant to maintain
- Free freight — ships on a pallet, insurance included
Why the Generac 7260 Has Different LP and NG Ratings
Propane carries more energy per unit than natural gas, so the same engine makes more power on LP. That is why this unit is rated 22kW on propane but 21kW on natural gas.
It matters when you are sizing close to the limit. If you are on natural gas, size the house against 21kW — not the 22kW on the box. Buying on the headline number and running natural gas is one of the most common ways people end up a size short.
Dual Fuel Operation: Propane or Natural Gas
The fuel is selected during installation. Natural gas means no tank and no refills, as long as your gas service can carry the load — worth confirming with your installer, because an undersized gas line starves the engine. Liquid propane needs a tank sized for the runtime you want; a long outage on a small tank is a short outage with a generator attached.
Wiring the Generac 7260: What You Will Actually Need
At 22kW on 240V this unit pulls roughly 92 amps. NEC 445.13 requires the conductors to be rated at least 115% of nameplate current, which puts you near 106 amps — typically #2 AWG copper as a starting point.
That is the ampacity answer only. Run length is the second test: past roughly 100 feet, voltage drop usually forces an upsize. Work it out before the trench is open. Full detail in what size wire you need between a standby generator and the transfer switch.
Power Output by Fuel — Read This Before You Size It
A dual fuel standby generator does not have one output figure, it has two. Natural gas carries less energy per cubic foot than propane, so most units produce less on gas. Here is what the Generac 7260 actually does on each:
| On liquid propane | 22 kW — about 92 A at 240 V |
|---|---|
| On natural gas | 21 kW — about 88 A at 240 V |
| Main line circuit breaker | 100 A |
That is a 4.5% reduction on natural gas, and it matters more than almost any other number on this page, because most homes run natural gas. Size against the 21 kW figure unless you are certain you will be on propane.
Sizing against the propane rating when you are actually on gas is the most common way people end up one size short — and you only find out during an outage, when the generator picks up the house and then drops it.
Not sure whether that is enough for your house? Use the sizing calculator — it works from your square footage, AC tonnage and appliances, and sizes against the fuel you will actually run.
Figures are Generac’s published ratings for this model. If you are sizing close to the limit, send us your load and we will check it with you.
Generac 7260 Specifications
| Model | 7260 |
|---|---|
| Rated output (LP) | 22 kW |
| Rated output (NG) | 21 kW |
| Fuel | Dual fuel — liquid propane or natural gas |
| Cooling | Air-cooled |
| Voltage | 120/240V single phase |
| Approx. current at rated LP output | 92 A |
| Transfer switch | Required, sold separately |
| Shipping | LTL freight, pallet — free |
Who the Generac 7260 Is Built For
Big homes, all-electric homes, two HVAC systems, or a well pump in the mix. If you want to not think about what is running during an outage, this is the class that gets you there.
Not sure? Read what size standby generator you need, or call us with your square footage, AC tonnage and whether heat and water are gas or electric.
Generac 7260 vs Generac 7325: Which Should You Buy?
Same generator, different package. The 7260 is the unit alone; the 7325 adds a 200A service-rated transfer switch for $939.00 more in cart.
Buy the bundle if you do not already have a switch picked out. Buy the unit alone if your installer has a specific switch in mind, or your service size calls for something other than what the bundle includes.
Installation Planning for the Generac 7260
Three things decide whether install day goes smoothly:
- Siting — clearances from the house, windows and openings are set by the manufacturer and your local code. Confirm before you pour the pad.
- Gas supply — natural gas installs need a line that can actually carry the unit’s demand. This is the step most often underestimated.
- Permits — most jurisdictions require electrical and often mechanical permits for a standby install. Check with your AHJ first.
A standby generator is not a DIY install in most places. It is a licensed electrical job, usually with a gas fitter involved.
Generac 7260 Maintenance and Long-Term Care
Air-cooled units are low maintenance but not no maintenance. Expect oil and filter changes on the manufacturer’s schedule, a periodic air filter and spark plug check, and keeping the enclosure clear of leaves and snow. The unit self-tests weekly — let it, and listen to it. A generator that has not been exercised in a year is the one that will not start when you need it.
Noise and Your Neighbors
Air-cooled standby units run a weekly self-test, usually a short cycle. If you have close neighbors, set the test for a reasonable hour — most complaints come from a 6am exercise cycle, not from the outage itself. Some jurisdictions have noise ordinances that affect siting, which is another reason to check local rules before placing the pad.
Why Buy the Generac 7260 from ZapDaddy Supplies
- Free freight to the lower 48, insurance included
- Real electricians on the phone — we size it with you before you spend $5,350.00
- Wire and switchgear in stock so the whole job ships together
- Straight answers on code — we will tell you what your AHJ is going to ask
Ready to Order Your Generac 7260?
Add it to the cart to see your price. If you are not certain on size, fuel or switch, call first — we would rather spend ten minutes on the phone than have you take delivery of the wrong unit on a pallet.
Complete the job
-
Generac 9951 200-Amp Service-Rated Automatic Transfer Switch with Integrated SPD
$1,090.00Add to cart for lowest price -
Generac 9952 200A Automatic Transfer Switch (Service Rated)
$949.00Add to cart for lowest price -
Generac 9953 200-Amp Automatic Transfer Switch with Type 2 SPD
$845.00Add to cart for lowest price -
Southwire 2 AWG Stranded Copper THHN/THWN-2 Building Wire, Black — 100 ft
$385.00Add to cart for lowest price
You might also like
-
Generac 7261 24kW Home Standby Generator
$6,729.00Add to cart for lowest price
Compare similar models
-
Generac 7257 10 kW Home Standby Generator — Dual Fuel
$3,769.00Add to cart for lowest price -
Kohler 10RESV 10kW Air-Cooled Home Standby Generator
Price range: $3,796.59 through $4,288.00Add to cart for lowest price -
Kohler 12RESV 12kW Air-Cooled Home Standby Generator
Price range: $4,240.99 through $4,728.00Add to cart for lowest price -
Generac 7321 10 kW Home Standby Generator — Dual Fuel with 100A 16-circuit ATS
$4,619.00Add to cart for lowest price -
Briggs & Stratton 40746 13,000-Watt Dual Fuel Home Standby Generator
$4,650.00Add to cart for lowest price -
Cummins RS13A 13,000-Watt Dual Fuel Home Standby Generator
$4,710.00Add to cart for lowest price -
Generac 7258 14 kW Home Standby Generator — Dual Fuel
$4,889.00Add to cart for lowest price -
Kohler 14RCA 14kW Air-Cooled Home Standby Generator
Price range: $4,899.00 through $5,839.00Add to cart for lowest price


















