Generac 7258 14 kW Home Standby Generator — Dual Fuel
14 kW on propane and natural gas. Air-cooled, auto-start. Ships free by freight.
Generac 7258: The 14kW Air-Cooled Workhorse
The Generac 7258 is an air-cooled home standby generator rated 14kW on liquid propane and the same 14kW on natural gas. It watches the utility feed, starts on its own when power drops, and carries the house until the grid comes back — no cords, no manual starting, nothing to remember during a storm.
Generac 7258 Key Highlights
- 14kW LP / 14kW NG — no derate between fuels, which is unusual and useful
- Transfer switch sold separately — so you can match the switch to your actual service
- Dual fuel — liquid propane or natural gas, selected at install
- Automatic operation — self-test, auto-start, auto-transfer
- Air-cooled — no radiator or coolant to maintain
- Free freight — ships on a pallet, insurance included
Same Output on Either Fuel
Most dual-fuel standby units lose output on natural gas because it carries less energy per unit than propane. This one does not — it holds 14kW on both. If you are on natural gas, that makes the sizing math simpler and removes the derate trap that catches people on larger units.
Dual Fuel Operation: Propane or Natural Gas
The fuel is selected during installation. Natural gas means no tank and no refills, as long as your gas service can carry the load — worth confirming with your installer, because an undersized gas line starves the engine. Liquid propane needs a tank sized for the runtime you want; a long outage on a small tank is a short outage with a generator attached.
Wiring the Generac 7258: What You Will Actually Need
At 14kW on 240V this unit pulls roughly 58 amps. NEC 445.13 requires the conductors to be rated at least 115% of nameplate current, which puts you near 67 amps — typically #4 AWG copper as a starting point.
That is the ampacity answer only. Run length is the second test: past roughly 100 feet, voltage drop usually forces an upsize. Work it out before the trench is open. Full detail in what size wire you need between a standby generator and the transfer switch.
Power Output by Fuel — Read This Before You Size It
A dual fuel standby generator does not have one output figure, it has two. Natural gas carries less energy per cubic foot than propane, so most units produce less on gas. Here is what the Generac 7258 actually does on each:
| On liquid propane | 14 kW — about 58 A at 240 V |
|---|---|
| On natural gas | 14 kW — about 58 A at 240 V |
| Main line circuit breaker | 60 A |
This model has no natural gas derate. You get the full 14 kW on either fuel, which is unusual and worth knowing — on most of the range gas costs you capacity, and here it does not. If you are on natural gas, this is a genuinely efficient choice.
Not sure whether that is enough for your house? Use the sizing calculator — it works from your square footage, AC tonnage and appliances, and sizes against the fuel you will actually run.
Figures are Generac’s published ratings for this model. If you are sizing close to the limit, send us your load and we will check it with you.
Generac 7258 Specifications
| Model | 7258 |
|---|---|
| Rated output (LP) | 14 kW |
| Rated output (NG) | 14 kW |
| Fuel | Dual fuel — liquid propane or natural gas |
| Cooling | Air-cooled |
| Voltage | 120/240V single phase |
| Approx. current at rated LP output | 58 A |
| Transfer switch | Required, sold separately |
| Shipping | LTL freight, pallet — free |
Who the Generac 7258 Is Built For
Average homes on gas heat with a single AC system. This is the size that covers most of what people actually miss during an outage without paying for whole-house capacity they will not use.
Not sure? Read what size standby generator you need, or call us with your square footage, AC tonnage and whether heat and water are gas or electric.
Generac 7258 vs Generac 7323: Which Should You Buy?
Same generator, different package. The 7258 is the unit alone; the 7323 adds a 200A service-rated transfer switch for $920.90 more in cart.
Buy the bundle if you do not already have a switch picked out. Buy the unit alone if your installer has a specific switch in mind, or your service size calls for something other than what the bundle includes.
Installation Planning for the Generac 7258
Three things decide whether install day goes smoothly:
- Siting — clearances from the house, windows and openings are set by the manufacturer and your local code. Confirm before you pour the pad.
- Gas supply — natural gas installs need a line that can actually carry the unit’s demand. This is the step most often underestimated.
- Permits — most jurisdictions require electrical and often mechanical permits for a standby install. Check with your AHJ first.
A standby generator is not a DIY install in most places. It is a licensed electrical job, usually with a gas fitter involved.
Generac 7258 Maintenance and Long-Term Care
Air-cooled units are low maintenance but not no maintenance. Expect oil and filter changes on the manufacturer’s schedule, a periodic air filter and spark plug check, and keeping the enclosure clear of leaves and snow. The unit self-tests weekly — let it, and listen to it. A generator that has not been exercised in a year is the one that will not start when you need it.
Noise and Your Neighbors
Air-cooled standby units run a weekly self-test, usually a short cycle. If you have close neighbors, set the test for a reasonable hour — most complaints come from a 6am exercise cycle, not from the outage itself. Some jurisdictions have noise ordinances that affect siting, which is another reason to check local rules before placing the pad.
Why Buy the Generac 7258 from ZapDaddy Supplies
- Free freight to the lower 48, insurance included
- Real electricians on the phone — we size it with you before you spend $4,319.10
- Wire and switchgear in stock so the whole job ships together
- Straight answers on code — we will tell you what your AHJ is going to ask
Ready to Order Your Generac 7258?
Add it to the cart to see your price. If you are not certain on size, fuel or switch, call first — we would rather spend ten minutes on the phone than have you take delivery of the wrong unit on a pallet.
Complete the job
-
Generac 9951 200-Amp Service-Rated Automatic Transfer Switch with Integrated SPD
$1,090.00Add to cart for lowest price -
Generac 9952 200A Automatic Transfer Switch (Service Rated)
$949.00Add to cart for lowest price -
Generac 9953 200-Amp Automatic Transfer Switch with Type 2 SPD
$845.00Add to cart for lowest price -
Southwire 4 AWG Stranded Copper THHN/THWN-2 Building Wire, Black — 100 ft
$255.00Add to cart for lowest price
You might also like
-
Generac 7259 18 kW Home Standby Generator — Dual Fuel
$5,709.00Add to cart for lowest price
Compare similar models
-
Generac 7257 10 kW Home Standby Generator — Dual Fuel
$3,769.00Add to cart for lowest price -
Kohler 10RESV 10kW Air-Cooled Home Standby Generator
Price range: $3,796.59 through $4,288.00Add to cart for lowest price -
Kohler 12RESV 12kW Air-Cooled Home Standby Generator
Price range: $4,240.99 through $4,728.00Add to cart for lowest price -
Generac 7321 10 kW Home Standby Generator — Dual Fuel with 100A 16-circuit ATS
$4,619.00Add to cart for lowest price -
Briggs & Stratton 40746 13,000-Watt Dual Fuel Home Standby Generator
$4,650.00Add to cart for lowest price -
Cummins RS13A 13,000-Watt Dual Fuel Home Standby Generator
$4,710.00Add to cart for lowest price -
Kohler 14RCA 14kW Air-Cooled Home Standby Generator
Price range: $4,899.00 through $5,839.00Add to cart for lowest price -
Briggs & Stratton 40742 13,000-Watt Dual Fuel Home Standby Generator
$5,270.00Add to cart for lowest price

















