Licensed electrical contractor — we install the equipment we sell

832-257-1977 ·  david@zapdaddyelectric.com

Licensed electricians, not a call center

Free freight on standby generators

Generator, switch and wire in one order

Specs checked against the manufacturer

Generac 7257 10 kW Home Standby Generator — Dual Fuel

$3,769.00Add to cart for lowest price

10 kW on propane and natural gas. Air-cooled, auto-start. Ships free by freight.

Generac 7257: The 10kW Air-Cooled Workhorse

The Generac 7257 is an air-cooled home standby generator rated 10kW on liquid propane and the same 10kW on natural gas. It watches the utility feed, starts on its own when power drops, and carries the house until the grid comes back — no cords, no manual starting, nothing to remember during a storm.

Generac 7257 Key Highlights

  • 10kW LP / 10kW NG — no derate between fuels, which is unusual and useful
  • Transfer switch sold separately — so you can match the switch to your actual service
  • Dual fuel — liquid propane or natural gas, selected at install
  • Automatic operation — self-test, auto-start, auto-transfer
  • Air-cooled — no radiator or coolant to maintain
  • Free freight — ships on a pallet, insurance included

Same Output on Either Fuel

Most dual-fuel standby units lose output on natural gas because it carries less energy per unit than propane. This one does not — it holds 10kW on both. If you are on natural gas, that makes the sizing math simpler and removes the derate trap that catches people on larger units.

Dual Fuel Operation: Propane or Natural Gas

The fuel is selected during installation. Natural gas means no tank and no refills, as long as your gas service can carry the load — worth confirming with your installer, because an undersized gas line starves the engine. Liquid propane needs a tank sized for the runtime you want; a long outage on a small tank is a short outage with a generator attached.

Wiring the Generac 7257: What You Will Actually Need

At 10kW on 240V this unit pulls roughly 42 amps. NEC 445.13 requires the conductors to be rated at least 115% of nameplate current, which puts you near 48 amps — typically #4 AWG copper as a starting point.

That is the ampacity answer only. Run length is the second test: past roughly 100 feet, voltage drop usually forces an upsize. Work it out before the trench is open. Full detail in what size wire you need between a standby generator and the transfer switch.

Power Output by Fuel — Read This Before You Size It

A dual fuel standby generator does not have one output figure, it has two. Natural gas carries less energy per cubic foot than propane, so most units produce less on gas. Here is what the Generac 7257 actually does on each:

On liquid propane 10 kW — about 42 A at 240 V
On natural gas 10 kW — about 42 A at 240 V
Main line circuit breaker 45 A

This model has no natural gas derate. You get the full 10 kW on either fuel, which is unusual and worth knowing — on most of the range gas costs you capacity, and here it does not. If you are on natural gas, this is a genuinely efficient choice.

Not sure whether that is enough for your house? Use the sizing calculator — it works from your square footage, AC tonnage and appliances, and sizes against the fuel you will actually run.

Figures are Generac’s published ratings for this model. If you are sizing close to the limit, send us your load and we will check it with you.

Generac 7257 Specifications

Model 7257
Rated output (LP) 10 kW
Rated output (NG) 10 kW
Fuel Dual fuel — liquid propane or natural gas
Cooling Air-cooled
Voltage 120/240V single phase
Approx. current at rated LP output 42 A
Transfer switch Required, sold separately
Shipping LTL freight, pallet — free

Who the Generac 7257 Is Built For

Smaller homes, or anyone who wants the essentials covered — heat, water, refrigeration, a few circuits — rather than the whole panel. Also a sensible choice where gas service or budget rules out a larger unit.

Not sure? Read what size standby generator you need, or call us with your square footage, AC tonnage and whether heat and water are gas or electric.

Generac 7257 vs Generac 7321: Which Should You Buy?

Same generator, different package. The 7257 is the unit alone; the 7321 adds a 100A 16-circuit transfer switch for $630.00 more in cart.

Buy the bundle if you do not already have a switch picked out. Buy the unit alone if your installer has a specific switch in mind, or your service size calls for something other than what the bundle includes.

Installation Planning for the Generac 7257

Three things decide whether install day goes smoothly:

  • Siting — clearances from the house, windows and openings are set by the manufacturer and your local code. Confirm before you pour the pad.
  • Gas supply — natural gas installs need a line that can actually carry the unit’s demand. This is the step most often underestimated.
  • Permits — most jurisdictions require electrical and often mechanical permits for a standby install. Check with your AHJ first.

A standby generator is not a DIY install in most places. It is a licensed electrical job, usually with a gas fitter involved.

Generac 7257 Maintenance and Long-Term Care

Air-cooled units are low maintenance but not no maintenance. Expect oil and filter changes on the manufacturer’s schedule, a periodic air filter and spark plug check, and keeping the enclosure clear of leaves and snow. The unit self-tests weekly — let it, and listen to it. A generator that has not been exercised in a year is the one that will not start when you need it.

Noise and Your Neighbors

Air-cooled standby units run a weekly self-test, usually a short cycle. If you have close neighbors, set the test for a reasonable hour — most complaints come from a 6am exercise cycle, not from the outage itself. Some jurisdictions have noise ordinances that affect siting, which is another reason to check local rules before placing the pad.

Why Buy the Generac 7257 from ZapDaddy Supplies

  • Free freight to the lower 48, insurance included
  • Real electricians on the phone — we size it with you before you spend $3,420.00
  • Wire and switchgear in stock so the whole job ships together
  • Straight answers on code — we will tell you what your AHJ is going to ask

Ready to Order Your Generac 7257?

Add it to the cart to see your price. If you are not certain on size, fuel or switch, call first — we would rather spend ten minutes on the phone than have you take delivery of the wrong unit on a pallet.

Attributes Value
Brand

Wattage

Fuel Type

Voltage

120/240V

Phase

Single Phase

You might also like

Compare similar models

Reviews

Be the first to review “Generac 7257 10 kW Home Standby Generator — Dual Fuel”

Your email address will not be published. Required fields are marked *

Generac 7257 10 kW Home Standby…$3,769.00Add to cart