Licensed electrical contractor — we install the equipment we sell

832-257-1977 ·  david@zapdaddyelectric.com

Licensed electricians, not a call center

Free freight on standby generators

Generator, switch and wire in one order

Specs checked against the manufacturer

Harris, Fort Bend and Waller counties · Mixed — depends on the address

Standby Generator Installation in Katy, TX

We sell the generator and we install it — a licensed electrical contractor, roughly 20 miles from Katy, not a national call center routing you to a subcontractor.

  • TECL 41659 · Master Electrician 830126
  • We price match any local quote
  • Pickup in Rosenberg or local delivery

Permits in Katy

City of Katy inside the limits; otherwise unincorporated Harris, Fort Bend or Waller County.

Katy is the most misunderstood jurisdiction in the metro. The City of Katy is small and straddles three counties, while most of what people call Katy is unincorporated Harris or Fort Bend County with a Katy postal address. Inside the city, a city permit. Outside, county authority only — and which county depends on the street. We check the address, not the mail.

How permitting works across the metro →

HOA and deed restrictions in Katy

Among the strictest in the metro. Get the architectural submittal moving early; it is more often the long pole than the permit.

Clearances that decide placement →

What we see in Katy homes

Heavy master-planned development from the 1990s onward, mostly with 200A services already in place — so the panel is usually not the obstacle. Placement and the gas line are.

Worth knowing locally. Addresses near the Barker Reservoir flood pool carry extra considerations that have nothing to do with city limits.

Neighborhoods we work in

  • Cinco Ranch
  • Firethorne
  • Cane Island
  • Grand Lakes
  • Seven Meadows
  • Falcon Ranch

Equipment, or equipment and install

The generator is roughly half a whole-house project — the rest is pad, gas line, wire, labor, permit and inspection. We quote the whole figure for your address before you order; the full cost breakdown is here.

Buying the hardware only is fine too. Katy is inside our local delivery area — $150, or free on two generators or more, and we match any local price.

Katy questions

Do I need a permit in Katy, or not?

City of Katy inside the limits; otherwise unincorporated Harris, Fort Bend or Waller County. Katy is the most misunderstood jurisdiction in the metro. The City of Katy is small and straddles three counties, while most of what people call Katy is unincorporated Harris or Fort Bend County with a Katy postal address. Inside the city, a city permit. Outside, county authority only — and which county depends on the street. We check the address, not the mail.

How long does an install take in Katy?

The electrical work is typically one to two days once the equipment is on site. Which side of the city limit you are on changes this, which is why we check the parcel before quoting rather than after.

What size do most Katy homes need?

Heavy master-planned development from the 1990s onward, mostly with 200A services already in place — so the panel is usually not the obstacle. Placement and the gas line are. Size against your actual loads rather than square footage alone — use the sizing calculator and then call, because in Houston it is the air conditioning that decides the answer.

Which parts of Katy do you cover?

All of it, including Cinco Ranch, Firethorne, Cane Island, Grand Lakes. We are about 20 miles away, so a site visit is straightforward.

Will my HOA in Katy be a problem?

Among the strictest in the metro. Get the architectural submittal moving early; it is more often the long pole than the permit. Start the submittal when you order the equipment rather than when it arrives — that is the step most likely to move your start date.

Anything specific to Katy I should know?

Addresses near the Barker Reservoir flood pool carry extra considerations that have nothing to do with city limits.

What an install in Katy usually involves

Representative of the work here — your lot decides the details.

Most Katy jobs are master-planned: a house built since the mid-nineties, already on a 200A service, with a panel that does not need touching. That part is easy.

The work is in the yard. These lots put the gas meter, both condensers and the only viable generator pad on the same narrow side yard, and the 5-foot clearance from openable windows removes most of the back wall. More often than not the unit ends up further from the panel than anyone wanted, which lengthens the feeder and the gas run at the same time.

Then there is the architectural committee. In Cinco Ranch or Firethorne the submittal is routine but it is not instant, and it is usually the thing deciding your start date rather than the permit. We tell people to get it moving the day they order the equipment.

Get a straight answer on your Katy install

Tell us the basics and we will come back with a size, a price and what the install involves. No obligation, and you will speak to the electrician — not a call center.

Rather talk now? 832-257-1977  ·  Text us a photo of your panel

Talk to the electrician, not a call center.

Tell us the property, the loads and the service. We will tell you the generator, the switch and the wire — and what the install in Katy will cost.