For a typical 2,000 sq ft home, the answer is usually 18kW to 22kW — but that range covers a $300 price gap and two quite different machines, and which one you need depends on what burns gas in your house.
The short answer by profile
| Your house | Size | Our pick |
|---|---|---|
| Gas heat, gas water heater, one AC up to 3.5 ton | 18 kW | Briggs 18kW — $5,050 |
| Gas heat, electric water heater | 22 kW | Generac 7260 — $5,350 |
| Gas heat, 4–5 ton AC | 22 kW | Generac 7260 — $5,350 |
| Well water | 22 kW | the pump surge needs headroom |
| All-electric | 26 kW+ | Generac 7327 — $6,099 |
Why square footage is a poor guide
Every sizing chart starts with square footage because it is the one number everybody knows. It is also the least predictive input.
A 3,000 sq ft house with gas heat, a gas water heater, a gas range and one air conditioner draws far less than a 1,800 sq ft all-electric house with a heat pump and strip heat. The fuel your major appliances burn matters more than the floor area.
What actually sets the number:
- Air conditioning tonnage — and its starting surge, which is usually what decides the size
- Whether heat, hot water and the range are gas or electric
- A well pump, which adds both running load and a big surge
- An EV charger, which at 48 amps is 11.5 kW on its own
The natural gas catch
If you run natural gas — and most homes do — your generator produces less than the badge says. A Generac 22kW gives 21 kW on gas. A Kohler 20RCA gives 18 kW.
The exception worth knowing: Briggs & Stratton 18kW and 22kW units produce full rated power on natural gas. That makes the Briggs 18kW at $5,050 deliver a real 18 kW, against 17 kW from the Generac 18kW at $5,099.99. More power, less money. Detail in Generac vs Briggs & Stratton.
The option that halves the bill
Everything above assumes whole-house backup. If you back up only what matters — furnace, refrigerator, well or sump pump, some lights and outlets — a 2,000 sq ft home is typically a 10kW to 14kW job.
That drops the generator price, the switchgear, often the gas meter upgrade and the labour. A typical essential-circuits install lands around $7,000–$10,000 against $12,000–$15,000 whole-house. See whole house vs essential circuits.
Square footage is a starting point, not an answer. Run the sizing calculator — it works from your actual loads and sizes against the fuel you run — or send us the details and a licensed electrician will check it.
Frequently Asked Questions
What size generator do I need for a 2,000 sq ft house?
Typically 18kW to 22kW for whole-house backup on gas heat. An all-electric home of the same size needs 26kW or more. Essential-circuits backup can be 10kW to 14kW.
Will a 20kW generator run a 2,000 sq ft house?
Usually yes if heat and hot water are gas and you have one air conditioning system. Note that a Kohler 20RCA produces 18 kW on natural gas, so size against that figure.
How much does it cost to back up a 2,000 sq ft house?
Roughly $12,000 to $15,000 installed for whole-house, or $7,000 to $10,000 for essential circuits.
