Licensed electrical contractor — we install the equipment we sell

832-257-1977 ·  david@zapdaddyelectric.com

Licensed electricians, not a call center

Free freight on standby generators

Generator, switch and wire in one order

Specs checked against the manufacturer

Generac 22kW Installation Cost: The Realistic Number

The Generac 22kW is the most commonly installed home standby size in the country, and the most commonly under-budgeted. The unit is $5,350 from us with free freight. The finished installation is usually $12,000 to $14,000.

Where the money goes on a 22kW job

Line itemTypicalNotes
Generac 7260 generator$5,35022 kW propane / 21 kW natural gas
200 A service-rated transfer switch$855 – $965or $410–$745 if you already have a main disconnect
Wire, conduit, fittings$350 – $800
Pad$300 – $700
Gas line$900 – $2,500a 22kW needs real gas volume
Electrical labour$1,800 – $3,200
Permit and inspection$150 – $600
Total$9,700 – $14,100
Our equipment prices; installation figures are typical ranges.

The 22kW gas question

A 22kW unit at full load is a significant gas appliance — comparable to adding several furnaces at once. Many existing residential meters cannot supply it.

If yours cannot, the utility upgrades the meter, and sometimes the service line from the street. That is usually free or low-cost from the utility but it adds weeks, and the pipe from meter to generator still has to be sized and run by your installer.

Ask your gas utility what your meter is rated for before you order. It is a five-minute phone call that prevents the most common delay in this whole process.

Can you fit the bill down?

Two honest options.

Consider whether you need 22kW at all. On natural gas this unit gives you 21 kW. For a gas-heated home with one AC system, an 18kW is frequently enough — and the Briggs 18kW gives a full 18 kW on gas for $5,050, with smaller gas demand and a cheaper line. Run the calculator before assuming you need the popular size.

Or go the other way and add load management. If you are between 22 and 26kW, a load manager at around $120 may let the 22 do the job of the larger unit.

What actually moves the number

Two identical generators on two identical houses can differ by $6,000 in installed cost. These are the reasons:

  • Distance from the generator to your panel. Every extra foot is conduit, wire and labour. A unit beside the meter is a fraction of the cost of one at the far corner of the lot.
  • Gas supply. This is the biggest wildcard. If your existing meter and line can feed the unit, it is a short run. If not, you are into a utility meter upgrade with its own timeline and cost.
  • Service-rated or not. Whether the transfer switch has to act as your main disconnect changes both the part and the labour.
  • Panel condition. An old or full panel often needs replacing before anything else happens.
  • Permit and inspection. Varies enormously by jurisdiction — from under $150 to well over $500.
  • Pad and site work. Level ground near the meter is cheap. A slope, a long trench, or poor drainage is not.

Equipment prices are ours and current. Installation figures are typical ranges from real jobs and vary widely by region, site and utility — they are here so you can budget honestly, not so you can hold a contractor to them. Ask us and we will help you build a realistic number for your property.

Work out your size first. Use the generator sizing calculator — it sizes against the fuel you actually run — then send us the result and we will quote the generator, the switch and the wire together.

Frequently Asked Questions

How much does it cost to install a Generac 22kW?

Typically $12,000 to $14,000 all-in. The generator itself is $5,350 from us; the balance is the transfer switch, wire, pad, gas line, labour and permit.

Does a Generac 22kW really produce 22kW?

On liquid propane, yes. On natural gas it produces 21 kW, and most homes run natural gas. Size against 21 kW.

Will my gas meter run a 22kW generator?

Often not without an upgrade. Call your gas utility and ask what your meter is rated for before you order — it is the most common cause of delay on these installs.

Related reading