Licensed electrical contractor — we install the equipment we sell

832-257-1977 ·  david@zapdaddyelectric.com

Licensed electricians, not a call center

Free freight on standby generators

Generator, switch and wire in one order

Specs checked against the manufacturer

Galveston and Harris counties · Incorporated city — city permit

Standby Generator Installation in Friendswood, TX

We sell the generator and we install it — a licensed electrical contractor, roughly 50 miles from Friendswood, not a national call center routing you to a subcontractor.

  • TECL 41659 · Master Electrician 830126
  • We price match any local quote
  • Pickup in Rosenberg or local delivery

Permits in Friendswood

City of Friendswood building department.

Friendswood is incorporated and spans two counties, but the city permits the work regardless of which side of the county line the house sits on.

How permitting works across the metro →

HOA and deed restrictions in Friendswood

Present in the newer communities; the older established areas are governed more by deed restriction than by an active committee.

Clearances that decide placement →

What we see in Friendswood homes

Established neighborhoods on generous, often wooded lots alongside newer sections. Services vary widely by vintage.

Worth knowing locally. Clear Creek flooding has shaped a lot of this area. Elevation is worth settling before placement, not after.

Neighborhoods we work in

  • Autumn Creek
  • West Ranch
  • Sun Meadow
  • Wilderness Trails

Equipment, or equipment and install

The generator is roughly half a whole-house project — the rest is pad, gas line, wire, labor, permit and inspection. We quote the whole figure for your address before you order; the full cost breakdown is here.

Buying the hardware only is fine too. Friendswood is inside our local delivery area — $150, or free on two generators or more, and we match any local price.

Friendswood questions

Do I need a permit in Friendswood?

City of Friendswood building department. Friendswood is incorporated and spans two counties, but the city permits the work regardless of which side of the county line the house sits on.

How long does an install take in Friendswood?

The electrical work is typically one to two days once the equipment is on site. The city permit and inspection are part of the schedule, and the gas meter is frequently the longest lead item on the job.

What size do most Friendswood homes need?

Established neighborhoods on generous, often wooded lots alongside newer sections. Services vary widely by vintage. Size against your actual loads rather than square footage alone — use the sizing calculator and then call, because in Houston it is the air conditioning that decides the answer.

Which parts of Friendswood do you cover?

All of it, including Autumn Creek, West Ranch, Sun Meadow, Wilderness Trails. We are about 50 miles away, so a site visit is straightforward.

Will my HOA in Friendswood be a problem?

Present in the newer communities; the older established areas are governed more by deed restriction than by an active committee. Start the submittal when you order the equipment rather than when it arrives — that is the step most likely to move your start date.

Anything specific to Friendswood I should know?

Clear Creek flooding has shaped a lot of this area. Elevation is worth settling before placement, not after.

Work we have done in Friendswood

Our own jobs, our own photographs — not stock images.

Extended loop for a 200A transfer switch, City of Friendswood — ZapDaddy Supplies
Extended loop for a 200A transfer switch, City of Friendswood
Completed standby generator installation — ZapDaddy Supplies
Completed standby generator installation

A 200A service that had to be extended to take the switch

The transfer switch could not simply land where the meter was. On this one the service had to be extended along the wall to reach a position where the switch, the meter and the gas side could all coexist with their clearances intact — the loop you can see running down the brick is that extension.

This is one of the most common surprises on an older home. The panel is fine, the service is fine, and the job still takes a day longer than a new-build because there is nowhere legal to put the switch without moving something first. It is also exactly the sort of thing that is cheaper to find on a site walk than on install day.

Get a straight answer on your Friendswood install

Tell us the basics and we will come back with a size, a price and what the install involves. No obligation, and you will speak to the electrician — not a call center.

Rather talk now? 832-257-1977  ·  Text us a photo of your panel

Talk to the electrician, not a call center.

Tell us the property, the loads and the service. We will tell you the generator, the switch and the wire — and what the install in Friendswood will cost.